Jeep Key Replacement Cost in Fort Worth (2026)

As of November 2026, a replacement Jeep key in Fort Worth typically costs $120 to $250 for a transponder key, about $175 to $300 for a remote-head or FOBIK style key, and about $250 to $450 for a push-button proximity fob, cut and programmed on site. All keys lost is quoted after we identify the platform. The model, year and trim decide the key, not the Jeep badge.
Jeep owners hit a pricing quirk that surprises them: the same model name has carried several generations of key hardware in only a few years. A Wrangler from the late 2000s, a Wrangler from the late 2010s and a Wrangler from the 2020s do not share a key type, and neither do all Grand Cherokees. This guide prices the work by model and by situation, so you can see where your own Jeep is likely to land before you call.
We are a mobile-only service. Everything below happens where your Jeep is parked, anywhere in Fort Worth and the surrounding Tarrant County area. Our broader Chrysler, Dodge and Jeep cost guide, Chrysler, Dodge and Jeep key replacement cost, covers the brand family by immobilizer generation. This page goes model by model.
Jeep Key Replacement Cost by Model
The table lists the typical key style for each Jeep family and the price band that applies. Year ranges are approximate, and trim can move a vehicle into the next row, so treat this as a map and not a promise.
| Jeep model | Typical key styles you will meet | Typical Fort Worth price (cut and programmed) | Notes |
|---|---|---|---|
| Wrangler (older generations) | Transponder key or Fobik-style key with a dash slot | $120β$300 | Older trucks lean on the WIN ignition module |
| Wrangler (newer generations) | Fobik-style key, or proximity fob with push-button start on some trims | $175β$450 | Later years may involve a security gateway |
| Grand Cherokee | Fobik-style key, or proximity fob on keyless-go trims | $175β$450 | Same year can be either, depending on trim |
| Cherokee, Compass, Patriot | Transponder or remote-head key on older years; proximity fob on newer | $120β$450 | Year and trim decide it |
| Renegade | Remote-head key or proximity fob | $175β$450 | Confirm by VIN |
| Gladiator | Proximity fob with push-button start | $250β$500 | Gateway-protected on later years |
| Spare key cut and programmed with a working key present | Any of the above | Lower end of each band | Session is already open |
| All keys lost, any Jeep | Any | Quote required after diagnosis | Access, PIN recovery, key list rebuild |
One line in that table matters more than the rest combined: the spare-key row. Every other row assumes a session that has to be opened from scratch.
The Three Jeep Key Generations You Will Meet
Transponder blade keys
The oldest and simplest. A metal key with a chip in its head, registered to the vehicle's immobilizer. No remote buttons on the key itself, or a separate remote fob. These sit in the $120β$250 band, and they are the least expensive Jeep key job.
Fobik-style keys
A fob-shaped key that still slides into a dash slot and twists. On Jeep, this style is tied to the WIN ignition module on many vehicles. It looks like a fob, so people assume push-button pricing, but the job is usually closer to the remote-head band: about $175 to $300. We cover the module side in our guide to Chrysler, Dodge and Jeep SKIM, WIN and PCM programming.
Proximity fobs with push-button start
The key stays in your pocket. The vehicle detects it over short-range antennas and a keyless module handles the authentication. These fobs sit at about $250 to $450, and later vehicles behind a security gateway can run higher. The keyless module, called an RF Hub on many Mopar vehicles, is a common point of failure, and a failed hub makes good keys look bad. We cover that in Jeep and Ram RF Hub keyless module programming.
Why the Same Model Produces Different Quotes
Trim decides the key
A Grand Cherokee built without keyless entry takes a different key than one built with proximity entry, in the same year. The same is true across the Jeep line. When someone says, "it's a 2015 Jeep," the honest answer is that the exact price cannot be pinned down until the key style is confirmed. A photo of the key, or the VIN, settles it quickly.
The security gateway on later vehicles
Starting around 2018, Mopar vehicles began shipping with a security gateway module that sits between the diagnostic port and the vehicle network. Nothing writes to the immobilizer through that port until the gateway permits it. It is a deliberate anti-theft measure, and it adds session time to late-model key work. It makes a job longer, not impossible. Our guide to security gateway module programming on Dodge, Ram and Jeep explains what happens.
A key problem or a module problem
Customers sometimes arrive convinced they need new keys when the real fault is the module that reads them. If a Jeep recognizes its keys on some days and not others, or ignores a brand-new fob, the WIN module or RF Hub may be the problem. Replacing keys will not fix that, and we check the module before programming anything. Our Wrangler and Gladiator key programming and RF Hub guide and Jeep Grand Cherokee WK2 ignition repair guide go into the platform details.
Blade cutting
Many later Jeep keys use high-security sidewinder blades, which are milled instead of cut on a basic duplicator. That adds machine time and a more expensive blank. It is a modest difference alone, but it is part of why a proximity fob is not priced like a chip key for an older Cherokee.
PIN access
Every Mopar immobilizer job comes down to a security PIN. With a working key, an authorized session reads what it needs and adds a key in minutes. With no working key, the PIN has to be recovered first. On some platforms that can be done through the diagnostic port, and on others it requires reaching the module directly. That single fork is why all keys lost is quoted and not listed.
Wrangler, Grand Cherokee and Gladiator: What Owners Actually Run Into
Wrangler. Soft-top and hard-top Wranglers get used hard, and keys get lost on trails, in water and at gravel lots. A lost Wrangler key is a frequent call. Older Wranglers are generally the less expensive end of the range. Later Wranglers can use proximity fobs and may involve the security gateway, so a lost-key call on a newer Wrangler is a quoted job.
Grand Cherokee. The model most likely to surprise an owner, because the same year can have a Fobik-style key or a proximity fob. If you are unsure which you have, check whether the vehicle has a start button or a key slot. That one fact narrows the price band.
Cherokee, Compass, Patriot and Renegade. Smaller platforms with a wider spread between older chip keys and newer proximity fobs. Year and trim matter more than the model name.
Gladiator. Treated like a late-model Wrangler for key purposes: proximity fob, push-button start and, on later years, gateway-protected programming. We confirm by VIN before quoting.
Spare Key Versus All Keys Lost
The price difference between these two situations is larger than most owners expect, so it is worth planning around.
With one working key, adding a spare is a short authorized session. The vehicle is already communicating, and the new key is registered alongside the existing one. This is the lower end of each band in the table.
With every key gone, the vehicle has to be accessed, the security PIN recovered, and the key list rebuilt from nothing. That is a different job. It takes longer, sometimes needs additional equipment, and is priced after diagnosis. If you have one key left and no spare, making a second one now is the cheapest decision on this page. If you drive a Ram instead, see our Ram 1500 and 2500 spare key guide. Our spare key cost by key type guide shows the same logic across other makes, and our all keys lost cost guide covers the lost-key side.
What a Jeep Key Visit Looks Like
Knowing the sequence helps you judge a quote. A typical mobile Jeep key job runs in five steps.
- Identify the vehicle. We confirm the VIN, the model year and the key style, and ask whether any working key exists.
- Test before programming. We scan the immobilizer and keyless modules to confirm they respond. A module that does not answer changes the job from a key job to a module job, and we tell you before touching anything.
- Cut the blade. Where the key has a mechanical blade, it is cut to the vehicle's code, so the key also works in the door lock and, on slot-ignition Jeeps, in the ignition.
- Register the key. The new chip or fob is added to the immobilizer. On vehicles that need every key present for registration, we ask you to bring all of them, because a key left out of the session may stop working.
- Test everything. We start the Jeep, check the remote functions, and confirm that the old keys still work.
Step 4 deserves a note. Some Jeeps rewrite the key list during programming, so any key that is not present can be dropped. If you have a spare in a drawer, bring it out before we start. A key that was forgotten is the usual reason an old spare stops working after a replacement.
Three Examples of How the Price Lands
These are illustrations of how the bands apply, not quotes for your vehicle.
A trail Jeep with a lost Fobik key and a working spare. The spare means the immobilizer session opens normally. This sits at the lower end of the remote-head band, because the work is a registration and a cut, not a recovery.
A family Grand Cherokee with a push-button start and one fob. A second fob is a proximity key job. It sits inside the $250 to $450 band, and the exact figure depends on the year and whether a security gateway is involved.
A late-model Wrangler with no key at all. This is the quoted category. We identify the platform, confirm the access route and give you a number after diagnosis. It costs more than the two jobs above, and it is the job that a spare would have avoided.
Dealer Versus Mobile Locksmith for a Jeep Key
A dealership can supply and program Jeep keys, and on some late-model, gateway-protected vehicles it is a legitimate option. For most Jeeps, though, the comparison looks like this. A dealer usually requires the vehicle to be brought in, which means a tow if you have no working key. Appointments are scheduled, and labor is billed hourly. In our area dealership labor commonly runs about $165 to $215 per hour before parts and any software access fee. A mobile specialist comes to the Jeep, finishes most jobs in one visit and prices to the bands above.
The National Automotive Service Task Force (nastf.org) administers the Vehicle Security Professional program that governs how verified independents access secure vehicle security data. In Texas, locksmith licensing runs through the Department of Public Safety Private Security Program. For the head-to-head view, see locksmith versus dealership car key replacement.
What Moves a Jeep Quote Up, and What Keeps It Down
Moves it up. All keys lost instead of a spare. A gateway-protected model year. A failed module instead of a failed key. After-hours dispatch. An aftermarket remote-start bypass module that has to be addressed before a key will register.
Keeps it down. Having one working key. Cutting two keys in the same visit, because the second is close to the cost of the blank and the cutting time. Knowing the key style before you call. Not replacing a module that does not need replacing.
Getting an Accurate Number Before Anyone Is Dispatched
Three pieces of information turn a range into a quote:
- The VIN. It settles the immobilizer generation and the correct blank without guessing.
- The key style. A photo of the existing key, or a clear description of whether it slides into a slot, folds out, or stays in your pocket.
- Whether a working key exists. It is the single biggest price variable.
For the service page covering this work directly, see car key replacement and the make page for Jeep. To book, call (817) 668-3801 or use the contact page.
Frequently Asked Questions
How much does a Jeep key replacement cost in Fort Worth?
As of November 2026, a Jeep transponder key typically runs $120 to $250 cut and programmed, a remote-head or FOBIK style key about $175 to $300, and a push-button proximity fob about $250 to $450. Where a specific Jeep lands depends on the model, year and trim, because two Jeeps of the same year can use different key hardware. All keys lost is quoted after the platform is identified.
Why do two Jeeps of the same year need different keys?
Trim and options decide the key. A base trim built without keyless entry takes a plain transponder or Fobik key, while a higher trim in the same year may use a proximity fob and push-button start. A photo of your current key or the VIN settles it in seconds, which is why we ask for one of them before quoting.
Can a locksmith program a Jeep key without the dealership?
Yes for most model years. Jeep key work has been accessible to properly equipped independents for years, and a mobile locksmith can cut and register keys where the vehicle is parked. The exception is a small group of late-model vehicles behind a security gateway, where the session takes longer and is arranged in advance instead of improvised in a parking lot.
What does a Jeep all keys lost job cost?
It is quoted after diagnosis, because the work depends on the platform. On older vehicles a key can often be originated through the diagnostic port, which keeps the job near the normal replacement range plus a recovery charge. On newer gateway-protected vehicles the session is longer and sometimes involves the keyless module, so we do not quote those over the phone.
Is it cheaper to make a spare Jeep key now?
Yes, and by a meaningful margin. Adding a key while you still have a working one is a short session. Rebuilding the key list from nothing after the last key is lost takes more time and sometimes more equipment. The difference on the same Jeep is routinely a few hundred dollars, and it removes the risk of a no-start with no key at all.
Will a new Jeep key work with remote start?
A correctly programmed key handles the immobilizer and the remote functions that live in the key, including factory remote start where the Jeep was built with it. An aftermarket remote-start unit installed between the key and the immobilizer can change the sequence, so tell us about it before the visit. A connected-services app problem is an account issue, not a key issue.
Can you come to me if my Jeep will not start and I have no key?
Yes. We are a mobile-only automotive service and travel to the vehicle anywhere in Fort Worth and the surrounding area, 24 hours a day. A no-key Jeep does not have to be towed to a dealer, and most key jobs are finished on site in a single visit.